MySQL 데이터 타입

http://dev.mysql.com/doc/refman/5.0/en/storage-requirements.html 에서 복사 해왔는데... 국산어는11.5 항목에 들어있음... 드래그가 안대 으흑...
http://www.mysqlkorea.co.kr/sub.html?mcode=develop&scode=01&m_no=21693&cat1=11&cat2=335&cat3=0&lang=k


10.5. Data Type Storage Requirements

The storage requirements for each of the data types supported by MySQL are listed here by category.

The maximum size of a row in a MySQL table is 65,535 bytes. Each BLOB and TEXT column accounts for only nine to twelve bytes toward this size. This limitation may be shared by other storage engines as well.

Important

For tables using the NDBCLUSTER storage engine, there is the factor of 4-byte alignment to be taken into account when calculating storage requirements. This means that all NDB data storage is done in multiples of 4 bytes. Thus, a column value that would take 15 bytes in a table using a storage engine other than NDB requires 16 bytes in an NDB table. This requirement applies in addition to any other considerations that are discussed in this section. For example, in NDBCLUSTER tables, the TINYINT, SMALLINT, MEDIUMINT, and INTEGER (INT) column types each require 4 bytes storage per record due to the alignment factor.

In addition, when calculating storage requirements for Cluster tables, you must remember that every table using the NDBCLUSTER storage engine requires a primary key; if no primary key is defined by the user, then a “hidden” primary key will be created by NDB. This hidden primary key consumes 31-35 bytes per table record.

You may find the ndb_size.pl utility to be useful for estimating NDB storage requirements. This Perl script connects to a current MySQL (non-Cluster) database and creates a report on how much space that database would require if it used the NDBCLUSTER storage engine. See Section 19.10.14, “ndb_size.pl — NDBCLUSTER Size Requirement Estimator”, for more information.

Storage Requirements for Numeric Types

Data Type	Storage Required
TINYINT	1 byte
SMALLINT	2 bytes
MEDIUMINT	3 bytes
INT, INTEGER	4 bytes
BIGINT	8 bytes
FLOAT(p)	4 bytes if 0 <= p <= 24, 8 bytes if 25 <= p <= 53
FLOAT	4 bytes
DOUBLE [PRECISION], REAL	8 bytes
DECIMAL(M,D), NUMERIC(M,D)	Varies; see following discussion
BIT(M)	approximately (M+7)/8 bytes

The storage requirements for DECIMAL (and NUMERIC) are version-specific:

As of MySQL 5.0.3, values for DECIMAL columns are represented using a binary format that packs nine decimal (base 10) digits into four bytes. Storage for the integer and fractional parts of each value are determined separately. Each multiple of nine digits requires four bytes, and the “leftover” digits require some fraction of four bytes. The storage required for excess digits is given by the following table:

Leftover Digits	Number of Bytes
0	0
1	1
2	1
3	2
4	2
5	3
6	3
7	4
8	4

Before MySQL 5.0.3, DECIMAL columns are represented as strings and storage requirements are: M+2 bytes if D > 0, M+1 bytes if D = 0, D+2 if M < D

Storage Requirements for Date and Time Types

Data Type	Storage Required
DATE	3 bytes
TIME	3 bytes
DATETIME	8 bytes
TIMESTAMP	4 bytes
YEAR	1 byte

The storage requirements shown in the table arise from the way that MySQL represents temporal values:

• DATE: A three-byte integer packed as DD + MM×32 + YYYY×16×32

• TIME: A three-byte integer packed as DD×24×3600 + HH×3600 + MM×60 + SS

• DATETIME: Eight bytes:

  • A four-byte integer packed as YYYY×10000 + MM×100 + DD

  • A four-byte integer packed as HH×10000 + MM×100 + SS

• TIMESTAMP: A four-byte integer representing seconds UTC since the epoch ('1970-01-01 00:00:00' UTC)

• YEAR: A one-byte integer

Storage Requirements for String Types

In the following table, M represents the declared column length in characters for non-binary string types and bytes for binary string types. L represents the actual length in bytes of a given string value.

Data Type	Storage Required
CHAR(M)	M × w bytes, 0 <= M <= 255, where w is the number of bytes required for the maximum-length character in the character set
BINARY(M)	M bytes, 0 <= M <= 255
VARCHAR(M), VARBINARY(M)	L + 1 bytes if column values require 0 – 255 bytes, L + 2 bytes if values may require more than 255 bytes
TINYBLOB, TINYTEXT	L + 1 bytes, where L < 28
BLOB, TEXT	L + 2 bytes, where L < 216
MEDIUMBLOB, MEDIUMTEXT	L + 3 bytes, where L < 224
LONGBLOB, LONGTEXT	L + 4 bytes, where L < 232
ENUM('value1','value2',...)	1 or 2 bytes, depending on the number of enumeration values (65,535 values maximum)
SET('value1','value2',...)	1, 2, 3, 4, or 8 bytes, depending on the number of set members (64 members maximum)

Variable-length string types are stored using a length prefix plus data. The length prefix requires from one to four bytes depending on the data type, and the value of the prefix is L (the byte length of the string). For example, storage for a MEDIUMTEXT value requires L bytes to store the value plus three bytes to store the length of the value.

To calculate the number of bytes used to store a particular CHAR, VARCHAR, or TEXT column value, you must take into account the character set used for that column and whether the value contains multi-byte characters. In particular, when using the utf8 Unicode character set, you must keep in mind that not all utf8 characters use the same number of bytes and can require up to three bytes per character. For a breakdown of the storage used for different categories of utf8 characters, see Section 9.1.8, “Unicode Support”.

VARCHAR, VARBINARY, and the BLOB and TEXT types are variable-length types. For each, the storage requirements depend on these factors:

• The actual length of the column value

• The column's maximum possible length

• The character set used for the column, because some character sets contain multi-byte characters

For example, a VARCHAR(255) column can hold a string with a maximum length of 255 characters. Assuming that the column uses the latin1 character set (one byte per character), the actual storage required is the length of the string (L), plus one byte to record the length of the string. For the string 'abcd', L is 4 and the storage requirement is five bytes. If the same column is instead declared to use the ucs2 double-byte character set, the storage requirement is 10 bytes: The length of 'abcd' is eight bytes and the column requires two bytes to store lengths because the maximum length is greater than 255 (up to 510 bytes).

Note

The effective maximum number of bytes that can be stored in a VARCHAR or VARBINARY column is subject to the maximum row size of 65,535 bytes, which is shared among all columns. For a VARCHAR column that stores multi-byte characters, the effective maximum number of characters is less. For example, utf8 characters can require up to three bytes per character, so a VARCHAR column that uses the utf8 character set can be declared to be a maximum of 21,844 characters.

As of MySQL 5.0.3, the NDBCLUSTER engine supports only fixed-width columns. This means that a VARCHAR column from a table in a MySQL Cluster will behave as follows:

• If the size of the column is fewer than 256 characters, the column requires one byte extra storage per row.

• If the size of the column is 256 characters or more, the column requires two bytes extra storage per row.

The number of bytes required per character varies according to the character set used. For example, if a VARCHAR(100) column in a Cluster table uses the utf8 character set, each character requires 3 bytes storage. This means that each record in such a column takes up 100 × 3 + 1 = 301 bytes for storage, regardless of the length of the string actually stored in any given record. For a VARCHAR(1000) column in a table using the NDBCLUSTER storage engine with the utf8 character set, each record will use 1000 × 3 + 2 = 3002 bytes storage; that is, the column is 1,000 characters wide, each character requires 3 bytes storage, and each record has a 2-byte overhead because 1,000 >= 256.

TEXT and BLOB columns are implemented differently in the NDB Cluster storage engine, wherein each row in a TEXT column is made up of two separate parts. One of these is of fixed size (256 bytes), and is actually stored in the original table. The other consists of any data in excess of 256 bytes, which is stored in a hidden table. The rows in this second table are always 2,000 bytes long. This means that the size of a TEXT column is 256 if size <= 256 (where size represents the size of the row); otherwise, the size is 256 + size + (2000 – (size – 256) % 2000).

The size of an ENUM object is determined by the number of different enumeration values. One byte is used for enumerations with up to 255 possible values. Two bytes are used for enumerations having between 256 and 65,535 possible values. See Section 10.4.4, “The ENUM Type”.

The size of a SET object is determined by the number of different set members. If the set size is N, the object occupies (N+7)/8 bytes, rounded up to 1, 2, 3, 4, or 8 bytes. A SET can have a maximum of 64 members. See Section 10.4.5, “The SET Type”.